PSI to Inches of Water

kPa to Inches of Water

kPa
0.11101001000 kPa
inH₂O
Water reference temp
Decimals

Suction lift

linked to result
A pump pulls a vacuum and lifts water up a pipe from a reservoir to the converted heightincmReservoirPUMP−3.5 kPalift

A pump pulling 3.5 kPa of vacuum lifts water 14.05 in up the pipe.

Lift1.171 ftof water
Lift0.357 mof water
Of max lift3.5%1 atm = 406.8 in

How kPa to Inches of Water Calculator Works?

The kPa to Inches of Water calculator works in 4 steps: it reads the pressure in kilopascals (kPa), converts the pressure to pascals (Pa), divides by 249.082 Pa per inch of water (inH₂O), and draws a pump lifting water up a pipe.

  1. Read the input3.5 kPaKilopascal gauge or vacuum reading
  2. Convert to pascals× 1,000 = 3,500 Pa1 kPa = 1,000 Pa
  3. Divide by 1 inH₂O÷ 249.082 = 14.05 inH₂OWater at 39.2 °F (4 °C)
  4. Draw the resultSuction liftLift: 1.171 ft · 35.69 cm

kPa to Inches of Water Formula

The kPa to Inches of Water formula is inH₂O = kPa × 4.0147, for water at 39.2 °F (4 °C).

inH₂O=kPa×4.0147
39.2 °F / 4 °C4.01471 inH₂O = 249.082 Pa. The usual standard.
60 °F / 15.6 °C4.01861 inH₂O = 248.84 Pa. US gas and HVAC.
68 °F / 20 °C4.02191 inH₂O = 248.64 Pa. Room-temperature lab.

Example: 3.5 kPa × 4.0147 = 14.05 inH₂O. Going the other way, 10 inH₂O ÷ 4.0147 = 2.491 kPa.

h1 inρ = 999.97 kg/m³g = 9.80665 m/s²P on the baseP = ρ × g × h= 999.97 kg/m³ × 9.80665 m/s² × 0.0254 m= 249.08 Pa1 kPa = 1,000 ÷ 249.08 = 4.0147 inH₂O
Hydrostatic pressure of 1 inch of water at 39.2 °F (4 °C)

kPa to Inches of Water Chart

The kPa to Inches of Water chart lists 31 pressures from 0.1 kPa to 688 kPa with inH₂O, ftH₂O and mmH₂O at the selected reference temperature (39.2 °F). Click a row to load the value into the calculator.

kPa to inches of water chart from 0 to 10 kPa at 39.2 °F0102030405002468101 kPa = 4.01 in2.5 kPa = 10.04 in3.5 kPa = 14.05 in5 kPa = 20.07 in7.5 kPa = 30.11 in10 kPa = 40.15 inPressure (kPa)Water column (inH₂O)
kPa to Inches of Water Chart
kPainH₂OftH₂OmmH₂O
0.10.4010.033510.2
0.251.0040.083625.5
0.52.0070.16751
14.0150.335102
1.56.0220.502153
28.0290.669203.9
2.510.0370.836254.9
312.0441.004305.9
3.413.651.138346.7
3.514.0521.171356.9
416.0591.338407.9
4.518.0661.506458.9
520.0741.673509.9
5.522.0811.84560.9
624.0882.007611.8
6.224.8912.074632.2
6.526.0962.175662.8
728.1032.342713.8
832.1182.676815.8
936.1333.011917.8
1040.1473.3461,019.7
1560.2215.0181,529.6
2080.2956.6912,039.5
25100.3698.3642,549.4
30120.44210.0373,059.2
50200.73716.7285,098.7
60240.88520.0746,118.5
100401.47433.45610,197.4
101.325 (1 atm)406.79433.89910,332.6
3001,204.423100.36930,592.3
6882,762.143230.17970,158.4

kPa to inches of water lift

The pump drawing above shows why the two units fit together. Pull a vacuum on top of a pipe and the air outside pushes water up it. Each kPa of vacuum raises the water about 4 inches.

kPa to Inches of Water FAQ

How do I convert kPa to inches of water?

To convert kPa to inches of water, multiply the kPa value by 4.0147. 3.5 kPa × 4.0147 = 14.05 inH₂O (35.7 cm).

How many inches of water are in 1 kPa?

1 kPa is 4.0147 inches of water (101.97 mm or 0.3346 ft of water) at 39.2 °F (4 °C).

Is kPa to inches of water column the same as kPa to inches water gauge?

Yes, kPa to inches of water column and kPa to inches water gauge give the same number. Inches of water column (inWC) and inches water gauge (inWG) name 1 unit, measured against the surrounding air.

What does kPa to inches of water lift mean?

kPa to inches of water lift is the height a vacuum in kPa pulls water up a pipe. A pump pulling 10 kPa of vacuum lifts water 40.1 in (1.02 m). The limit is 1 standard atmosphere (101.325 kPa), which lifts water 406.8 in (33.9 ft or 10.33 m) at sea level. Real pumps reach 20 to 25 ft (6.1 to 7.6 m), as pipe friction and water vapor pressure take part of the lift.

What is 50 kPa in inches of water?

50 kPa is 200.7 inches of water, equal to 16.73 ft (5.10 m) of water and 7.25 psi.

What is 300 kPa in inches of water?

300 kPa is 1,204 inches of water, equal to 100.4 ft (30.6 m) of water and 43.5 psi. A 300 kPa water column needs a pump pushing from below, as suction lifts water no higher than 101.325 kPa (406.8 in).